OK, here goes with a little run through...
I started with this (plus a few other bits and pieces):

And ended up with this:

Here's a shot with better white balance:

The tank is 4' x 18" x 2' (about 340L or 75G), filtered by an Eheim 2213, Eheim 2217, Pro Aqua CF1200 and a PondMaster 11w UV steriliser:

I was given strict instructions from "upper management" that I could have only one tank and that it had to look good without plumbing running everywhere. So, plumbing for the filtration is located behind the 3D background except for the strainers for the 2 big canisters and outlet for one of them. Two of the canisters pump water back into the tank behind the background and this flows through a number of holes hidden away. The smaller canister has a strainer plumbed into the background (you can just see this about the middle - bottom 1/3 of the tank.
It will be home to a Tropheus moorii Ilangi colony of about 20-25 and various catfish (a few suckers, featherfin and cuckoo). It will be a display tank, breeding will be a bonus, eventually, but I won't worry too much about them going missing to the catfish.
I picked up a couple bristle nose and plecos yesterday...


...with a trip to Canada in July, the main occupants will be waiting until our return in August.
I've got a few more pics of the
BACKGROUND INSTALL,
TANK SETUP and
TANK OCCUPANTS available (follow the links). These will be added too as I go along.
Cheers
Jon